Before deciding how to arrange floor lighting in a specific version, you should understand what general requirements for lamps, their elements and light characteristics are appropriate in this case.

The floor is a place that is fraught with many dangers for luminaires and puts forward special requirements for the characteristics of light emission. In particular:

The level of moisture and dust resistance of floor-mounted luminaires should be high. The fact is that the floor often has to be washed, so the probability of water getting into the luminaire body is very high.

Dust also accumulates on the floor, posing a hazard to the electrical parts of the lighting device.

The luminaire must have a sturdy housing. This is for the case when the device is touched by feet or some kind of heavy object. The lamp must be well protected against impact.

The light should not be too bright. Otherwise, residents will feel discomfort. Suffice it to have such a level of illumination at which you can freely navigate in a dark room.

Luminaires must be economical. Energy-saving technologies will help save the owner's money.

Fire safety. The luminaire should not heat the baseboard or the floor, this may result in spontaneous ignition.

Basic floor lighting devices

As the photo of the floor lighting shows, a variety of lamps, both modern and traditional, are used for this purpose.

LED point devices

Spotlights are convenient to install, since it will not be difficult for them to drill a corresponding niche in the laminate or even in wood.

They are shock-resistant, emit a pleasant directional light, while consuming a minimum amount of electricity.

In the bathroom, it is difficult to find a replacement for spotlights, and in all other rooms they look appropriate. LEDs consume a small amount of electricity and last a long time.

Note! Attic lighting - how to organize? 125 photos of the most creative solutions!

Traditional neon lamp

The neon lamp is a well-known device. It emits soft light, creating the effect of filling the space. Naturally, a lamp is not only a lamp, but also converters, wires and so on. For them, you need to make special niches.

The neon lamp lasts for a long time, guaranteeing about a hundred shades of light.

But it is quite expensive and mechanically unstable. In addition, it is difficult to install such a lamp on your own; you will have to pay for the work of a specialist.

LED strips

The good thing about the LED strip is that it can be mounted anywhere, you can choose the required length, color range and other characteristics. This tape does not overheat, lasts a long time, and has low power consumption. It is easy to install it yourself. If you use a controller, you can create alternating digital songs.

Among some disadvantages: the tape requires a separate power supply, which must be hidden somewhere.

Duralight LED

The LEDs are arranged in a PVC tube in a specific order. Such a device is called LED duralight, one of its purposes is modern floor lighting.

Duralight in originality and some other characteristics can compete with spotlights and LED strip. Connecting the device does not require special knowledge and skills.

Neon flexible

Flexible neon is a flexible translucent PVC tube that houses LEDs. The word "neon" in the name is used because the device emits light that is close to neon in appearance.

The obvious advantage is flexible neon stacking in any configuration. Manufacturers claim that they guarantee the operation of their product without breakdown for one hundred thousand hours.

LED floor

The idea of ​​creating a lamp in the form of a floor element is reasonable, but has not yet gained sufficient popularity. And in vain, such devices allow you to literally work wonders in terms of design.

Below are some tips to help you organize your floor lighting at a high level.

The use of dimmer switches will allow you to adjust the light intensity. This is a great way to create a cozy atmosphere.

The staircase lighting (if there is one) must be done without fail. And not only for decorative purposes, but also for security purposes.

Do not install the backlight on uneven floors. In this case, it will be difficult to achieve the required glow.

Bright illumination is created by ribbons and cords of small size, but high power. If you need diffused light, wide low-power cords and ribbons will do.

The LED strip should not be cut off anywhere. It has special factory markings for this purpose.

Photo of floor lighting ideas